Smart-technologies 3000i Instrukcja Użytkownika Pobierz pdf (Strona 31)

3000i Installation Guide

Connecting a VCR or DVD Player

Connect the yellow RCA video connector on an RCA composite video cable (not

provided) to the Video Output jack on the VCR/DVD player. This jack may be labeled

“To Monitor.” Plug the other end of the cable into the

RCA Composite Video IN

on the

Connection Panel.

•

If you're using an S-video cable, connect it to the "S-video Out" connector on the

VCR/DVD. Plug the other end directly into the

S-video IN

on the Connection Panel.

(See the

NOTE

in step 4.)

Connect standard red and white RCA audio cables (not provided) from the RCA Audio

Outputs on the VCR/DVD player to the two

Audio IN

(

L/R)

jacks on the Connection

Panel. Keep your right and left channel connections correct for stereo sound.

NOTE

: You can’t connect audio from both a VCR and a DVD player. The Connection

Panel can only accommodate one external audio source at a time.

Connect the VCR/DVD player power cable to the bottom of the power bar (as shown in

the figure on the following page).

Press the

Display Source

button on the Control Panel until the LED indicator next to the

Video IN symbol

is lit.

NOTE

: The Display Source button will

not

switch projector input to a VCR/DVD player

connected via S-video. To switch to an S-video source, you must use your projector

remote control. The LED indicator next to the Video IN symbol on the Control Panel will

then illuminate.

Computer 2 Inputs

Outputs

S-Video

Printer / Network

Auxiliary

Inputs

S-Video

RCA Composite Video IN

(Yellow)

Audio IN (L/R)

S-Video IN

Connections to VCR/DVD Player

To Video Output

To RCA L/R Audio Outputs

To S-Video Output

White

Red

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 61 62

Komentarze do niniejszej Instrukcji

Brak uwag

Smart-technologies 3000i Instrukcja Użytkownika Strona 31

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Projektory Smart-technologies 3000i